A man-basket has been up and down to the top of these tanks for most of the day. Sometimes between the tanks, mostly to the tops. @LabPadre #LabCam

Swinging over to the area where SpaceX intend on building a new OLIT and OLM, a new stitcher has been raised up ahead of installing new wick drains. Perspective is hard, but I think this is the piece of land previously not owned by SpaceX. @LabPadre #LabCam

Last night, Maarvin was busy moving disconnected pieces from the base/plumbing of the removed water tank. @LabPadre #LabCam

While the Perlite removal guys were at work...over on @LabPadre #LabCam Maarvin has picked up the load spreader and been hooked up to the inner water tank left behind after the shell was removed.

The lift-n-shift ahead of being cut to pieces. @LabPadre #LabCam

This morning, cutting crews have freed the remaining ribbed section of tank shell. Reminder...word is...today's the day the Perlite removal crew arrive...I'm looking forward to seeing that done. @LabPadre #LabCam

Here you can see workers cutting some of the remaining panel free from the base...leaving some until they are about ready to lift it free I guess. @LabPadre #LabCam

And tank destruction...no change! @LabPadre #LabCam

@LabPadre An early morning look from @LabPadre #LabCam

Last night, what looked like a spreader bar was raised above the remains of the water tank/shell. It also appears that workers were welding...maybe lifting eyes/brackets onto the left-behind shell piece. @LabPadre #LabCam

Lift-off and landing. Job done! Well...the first part at least... Let the scrapping begin! @LabPadre #LabCam

Stage separation! @LabPadre #LabCam

Another #AgentJ timelapse...this time showing exactly how the rear of the water tank shell is being cut. When complete, the 2 bottom points will be angled around and join in front before the crane completes the lift. Soon hopefully. @LabPadre #LabCam

...that theory tends to tie-in with this view from @LabPadre #LabCam When they reach the bottom of their vertical run of cutting, they switch to cutting around the front of the shell.

More chopstick testing from last night. SpaceX seem only to be activation the left arm, the one where the actuator was replaced. @LabPadre #LabCam

Earlier on today, the rear of the BQD hood was removed again. Here, on @LabPadre #LabCam, you can see it move behind the new restroom and be staged nearby.

🚀 B11 has been lifted from the OLM. 👏 Big thanks to @LabPadre #R2 for the lift and translation. 🎥 #LabCam for the smooth lowering onto the awaiting transport stand. #SpaceX #Starship

B11 has been lifted from the OLM. @LabPadre #R2 for the lift and translation, #LabCam for the translation and lowering onto the awaiting transport stand.

I remember the days when we used to look out for a road closure, an OP and a NOTMAR. Do they not issue NOTMAR/MSIBs any more? @LabPadre #LabCam

@LabPadre #LabCam